Air Cleaner Intake Duct Replacement
AIR CLEANER INTAKE DUCT REPLACEMENT
REMOVAL PROCEDURE
1. Remove the left front tire and wheel.
2. Remove the left front fender liner.
3. Remove the air cleaner intake duct assembly push-in fasteners.
4. Remove the air cleaner intake duct assembly bolt.
5. Remove the intake duct assembly from the vehicle.
INSTALLATION PROCEDURE
1. Position the intake duct assembly.
2. Install the intake duct assembly bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 10 N.m (89 lb ft).
3. Install the intake duct assembly push in fasteners.
4. Install the left front fender liner.
5. Install the left front tire and wheel.