71. Supercharger Installation

Supercharger Installation





1. Install the supercharger gasket.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the supercharger.
3. Install the supercharger bolts.
^ Tighten the bolts to 25 Nm (18 ft. lbs.).





4. Install the boost solenoid, bracket and hoses.





5. Install the fuel rail and injector cups.
6. Install the fuel rail studs.
^ Tighten the fuel rail and injector studs to 10 Nm (89 inch lbs.).





7. Install the baro sensor and coolant return line as an assembly.
8. Install the coolant return line bolt.
^ Tighten the bolt to 8 Nm (71 inch lbs.).





9. Install the fuel rail feed line and injector harness bracket.
10. Install the injector harness bracket nut.
^ Tighten the fuel feed line to 14 Nm (124 inch lbs.).
^ Tighten the fuel feed line and injector harness bracket nut to 10 Nm (89 inch lbs.).





11. Install the boost solenoid bracket nut.
^ Tighten the nut to 10 Nm (89 inch lbs.).
12. Install the boost solenoid hose to the supercharger.





13. Install the throttle body gasket.
14. Install the throttle body.
15. Install the throttle body bolts.
^ Tighten the bolts to 10 Nm (89 inch lbs.).