Horn: Description and Operation

Horns System Description and Operation

System Description

The horn system consists of the following components:

* Horn 15A fuse

* Horn relay

* Horn switch

* Horns

System Operation

* The vehicle horn is activated whenever the horn switch is depressed.

* The Tire Pressure Monitor system will command the horns to chirp to indicate that the pressure sensors have been properly reprogrammed-For further information refer to Tire Pressure Monitor Description and Operation.

Circuit Operation

Battery positive voltage is applied at all times to the horn relay coil and the horn relay switch. Pressing the horn switch applies ground through the switch contacts and the horn relay control circuit to the coil side of the relay, energizing the relay. Battery voltage is then applied through the switch side of the relay, the horn fuse, and the horn control circuit to the horns. The horns sound as long as ground is applied to the horn relay control circuit