Headlamp Replacement (Four Door/Wagon)

Headlamp Replacement (Four Door/Wagon)

Removal Procedure





Caution:
Refer to Battery Disconnect Caution Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.

2. Remove the headlamp mounting bolts.





3. Remove the headlamp mounting nut.





4. Disconnect the turn signal electrical connector.

5. Remove the turn signal bulb, if necessary.





6. Disconnect the headlamp electrical connector.





7. Remove the headlamp assembly.

8. Turn left and remove the headlamp bulb cap, if necessary.





9. Dry off the headlamp bulb clip.

10. Disconnect the headlamp bulb connector.





11. Remove the headlamp bulb, if necessary.

Installation Procedure





1. Install the headlamp bulb, if removed.





2. Connect the headlamp bulb connector.

3. Install the headlamp bulb clip.





4. Turn to the right and install the headlamp bulb cap.

5. Install the headlamp assembly.





6. Connect the headlamp electrical connector.





7. Install the turn signal bulb, if removed.

8. Connect the turn signal connector.





Notice:
Refer to Fastener Notice Fastener Notice in Cautions and Notices.

9. Install the headlamp mounting nut.

Tighten the headlamp mounting nut to 4 Nm (35 lb in).





10. Install the headlamp mounting bolts.

Tighten the headlamp mounting bolts to 4 Nm (35 lb in).

11. Connect the negative battery cable.