5. Differential Case Disassemble

Differential Case Disassemble

^ Tools Required
- 87-92-210 Support, Differential Bearing
- J 8107-2 Side Bearing Puller Pilot
- J 22888-20A Universal Two Jaw Puller





1. Mount the differential in a vise with soft jaws.

2. Notice: The thread on adapter must be used on the 5th gear puller when removing the differential bearings. If the adapter is not used, the puller can be damaged.

Remove the differential bearings using the J 22888-20A with the J 8107-2. Use the 87-92-210 as a base for the puller as shown.