Scan Tool Data Definitions

Scan Tool Data Definitions

Body Control Module (BCM)

Battery Voltage Signal
Display indicates battery voltage. Measured in volts.

BTSI Solenoid
Displays the status of the control circuit for the shift lock control solenoid. ON indicates the control circuit is grounded. OFF indicates that the control circuit is not grounded.

Engine Control Module (ECM) / Powertrain Control Module (PCM)

Ignition 1 Signal
Display indicates ON when the ignition 1 input circuit of the module receives a battery signal from the ignition switch.

Stoplamp Pedal Switch
Display Applied or Released status of the stoplamp pedal switch.

TCC Brake Switch
Displays ON or OFF status of the TCC Brake switch.

TR Sw. A/B/C/P
Displays LOW or HI for the state of each of the four inputs from the IMS. LOW displayed indicates a low voltage signal (0 volts) being monitored at the ECM/PCM. HI displayed indicates a high voltage signal (B+) being monitored at the ECM/PCM.