Shock Absorber Replacement

Shock Absorber Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting
2. Remove the wheel.





3. Support the rear axle with a tall jack stand near the shock absorber.

Shock Absorber:

4. Remove the upper and lower shock bolts.
5. Remove the shock from the vehicle.

Installation Procedure
1. Position the shock absorber to the vehicle.

Shock Absorber:

Notice: Refer to Fastener Notice in Service Precautions.

2. Install NEW upper and lower shock bolts.
^ Tighten the upper bolt to 90 Nm (66 ft. lbs.).
^ Tighten the lower bolt to 110 Nm (81 ft. lbs.).
3. Remove the jack stand.
4. Install the wheel.
5. Lower the vehicle.