Charge Air Cooler Radiator Hose Replacement - Inlet

Charge Air Cooler Radiator Hose Replacement - Inlet

^ Tools Required
- GE-47622 Hose Clamp Pliers

Removal Procedure
1. Drain the cooling system.





2. Using the GE-47622, compress the charge air cooler radiator inlet hose clamp at the charge air cooler radiator.
3. Remove the charge air cooler radiator inlet hose from the charge air cooler radiator.
4. Lower the vehicle.





5. Using the GE-47622, compress the charge air cooler radiator inlet hose clamp at the charge air cooler reservoir.
6. Remove the charge air cooler radiator inlet hose from the charge air cooler reservoir.

Installation Procedure





1. Using the GE-47622, compress the charge air cooler radiator inlet hose clamp.
2. Install the charge air cooler radiator inlet hose to the charge air cooler reservoir.
3. Raise the vehicle. Refer to Vehicle Lifting.





4. Using the GE-47622, compress the charge air cooler radiator inlet hose clamp.
5. Install the charge air cooler radiator inlet hose to the charge air cooler radiator.
6. Lower the vehicle.
7. Fill the cooling system.