62. Engine Front Cover and Oil Pump Installation

Engine Front Cover and Oil Pump Installation





1. Install the engine front cover with a new gasket.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the long water pump bolt.
^ Tighten the water pump bolt to 25 Nm (18 ft. lbs.).





3. Install the engine front cover bolts.
^ Tighten the engine front cover bolts to 25 Nm (18 ft. lbs.).





4. Install the generator bracket and lift hook assembly.
^ Tighten to 42 Nm (31 ft. lbs.).





5. Install the idler pulley.
^ Tighten the pulley to 22 Nm (16 ft. lbs.).





6. Install the accessory drive belt tensioner.
^ Tighten the accessory drive belt tensioner bolt to 32 Nm (24 ft. lbs.).