Engine Mount: Service and Repair

Fig. 1 Engine mount replacement. Exc 1987-88 turbocharged models:

Fig. 2 Engine mount replacement. 1987-88 turbocharged models:

1. Disconnect battery ground cable.
2. Support engine using a suitable jack.
3. Remove two bolts and plate from right side of engine.
4. Remove right side mount attaching bolt and the mount, Fig. 1. and 2
5. Remove engine side bolt, body side nut and bolt the torque rod, Fig. 1 and 2.
6. Remove through bolts and nuts from front and rear engine mounts.

Fig. 3 Engine beam removal:

7. Remove 4 beam attaching bolts and the beam, Fig. 3.
8. Remove front and rear engine mounts.
9. Reverse procedure to install.