Headlamp Dimmer Switch: Service and Repair

Fig. 2 Turn signal/dimmer switch removal:

1. Disconnect battery ground cable.
2. Remove steering joint cover.
3. Remove steering wheel pad.
4. Using suitable puller, remove steering wheel.
5. Remove steering column lower cover, Fig. 2.
6. Disconnect main switch and turn signal/dimmer switch connectors.
7. Remove turn signal/dimmer switch, Fig. 2.

Fig. 3 Ignition switch removal:

8. Remove ignition switch screws, then switch, Fig. 3.

Fig. 4 Ignition switch installation:

9. Reverse procedure to install. Position ignition switch so recess is mated with tab on bracket, Fig. 4.