Symptoms-Instrument Panel and Console Trim

Symptoms-Instrument Panel and Console Trim

Note: The following steps must be completed before using the symptom tables.

1. Perform the Diagnostic System Check - Vehicle Diagnostic System Check - Vehicle before using the Symptom Tables in order to verify that all of the following are true:

* There are no DTCs set.

* The control modules can communicate via the serial data link.

2. Review the system operation in order to familiarize yourself with the system functions. Refer to Instrument Panel Compartment Description and Operation Description and Operation.

Visual/Physical Inspection

* Inspect for aftermarket devices which could affect the operation of the system. Refer to Checking Aftermarket Accessories Checking Aftermarket Accessories.

* Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.

Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections Testing for Intermittent Conditions and Poor Connections.

Symptom List

Refer to the symptom diagnostic procedure below in order to diagnose the symptom:

Instrument Panel Compartment Door Latch Release Malfunction Testing and Inspection