Rear Bumper Fascia Extension Replacement (MWN)

Rear Bumper Fascia Extension Replacement (MWN)











2.Remove the rear bumper fascia reinforcement. Refer to Rear Bumper Fascia Reinforcement Replacement .

3.Remove the rear bumper fascia heat shield. Refer to Rear Bumper Fascia Heat Shield Replacement .

1Rear Bumper Fascia Extension

Procedure

1.Carefully push a small nylon wedge between the rear fascia and the fascia extension. Insert a small flat-bladed tool into the fascia slot and depress the tabs one at a time and pull on the fascia at the same time to gradually remove the fascia extension from the rear fascia.

2.Transfer components as necessary