Rear Bumper Fascia Extension Replacement (ISA)

Rear Bumper Fascia Extension Replacement (ISA)












2.Remove the rear bumper fascia reinforcement. Refer to Rear Bumper Fascia Reinforcement Replacement Rear Bumper Fascia Reinforcement Replacement .

1Rear Bumper Fascia Extension Retainer (Qty: 2)

2Rear Bumper Fascia Extension Rivet (Qty: 3)
Warning:Refer to Eye Protection Warning .
Caution:Refer to Fastener Caution .

3Rear Bumper Fascia Extension

Procedure

1.Carefully push a small nylon wedge between the rear fascia and the fascia extension. Insert a small flat-bladed tool into the fascia slot and depress the tabs one at a time and pull on the fascia at the same time to gradually remove the fascia extension from the rear fascia.

2.Transfer components as necessary