Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Oil Level Indicator Tube Replacement (LLT)

Removal Procedure




1. Remove the front compartment sight shield as necessary. Refer to Front Compartment Sight Shields Replacement (Service and Repair).
2. Remove the oil level indicator from the oil level indicator tube.
3. Remove the oil level indicator tube bolt.
4. Remove the engine splash shield. Refer to Engine Splash Shield Replacement (Engine Splash Shield Replacement).
5. Lower the vehicle.
6. Remove the oil level indicator tube up through the exhaust manifold.
7. If you are replacing only the oil level indicator tube seal, remove and discard the old seal.

Installation Procedure




1. Install the oil level indicator and tube. Refer to Oil Level Indicator and Tube Installation (135. Oil Level Indicator and Tube Installation).
2. Install the engine splash shield. Refer to Engine Splash Shield Replacement (Engine Splash Shield Replacement).
3. Lower the vehicle.
4. Install the front compartment sight shield as necessary. Refer to Front Compartment Sight Shields Replacement (Service and Repair).