Radio Rear Speaker Replacement (Center)

Radio Rear Speaker Replacement (Center)

Removal Procedure

1. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement (Service and Repair).




2. Remove the nuts securing the center speaker (2).
3. Disconnect the electrical connector.
4. Remove the speaker (2).

Installation Procedure




1. Install the speaker (2).
2. Connect the electrical connector.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the nuts securing the center speaker (2) and tighten to 9 Nm (80 lb in).
4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement (Service and Repair).