Weatherstrip Replacement - Rear Door Window

REMOVAL PROCEDURE




1. Lower the door window.
2. Remove the door trim panel.
3. Remove the inner belt sealing strip.
4. Remove the window run channel weatherstrip:
4.1. Start at the upper rear corner of the door frame.
4.2. Pull out the weatherstrip.

INSTALLATION PROCEDURE




1. Install the window weatherstrip:
1.1. Start at the upper rear corner of the door frame.
1.2. Insert the weatherstrip into the channel.
2. Install the inner belt sealing strip.
3. Install the door trim panel.
4. Close the door window.