Parts Cleaning, Inspection and Replacement

1. Inspect the shift control cable for the following conditions. Repair or replace as needed:
- Wear at the pivot points
- Bent or broken cable housing
2. Inspect all of the seals, the gaskets, the O-ring seals, and the mating surfaces for the following conditions. Replace as needed:
- Nicks
- Cuts
- Damage
3. Inspect the snap rings for the following conditions. Replace as needed:
- Expansion
- Compression
- Distortion
- Nicks
- Improper ring to groove fit
4. Inspect all of the bearing and thrust surfaces for the following conditions. Replace as needed:
- Wear
- Scoring
- Pitting