Front

Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the front wheel assembly. Refer to Tire and Wheel Removal and Installation.
3. Remove the stabilizer shaft link nut from the stabilizer shaft and from the strut assembly. Use a 17 mm wrench to counter hold if necessary.





4. Remove the stabilizer shaft link.

Installation Procedure





1. Install the stabilizer link to the stabilizer shaft and to the strut assembly.

Notice: Refer to Fastener Notice

2. Install the stabilizer shaft link nuts.
^ Tighten the stabilizer shaft link nuts to 65 Nm (48 ft. lbs.). Use a 17 mm wrench to counter hold if necessary.
3. Install the front wheel assembly. Refer to Tire and Wheel Removal and Installation.
4. Lower the vehicle.