Seat Belt Buckle Pretensioner Replacement - RH

REMOVAL PROCEDURE
1. Disable the SIR system.
2. Remove the passenger seat.
3. Remove the nut from the passenger seat belt pretensioner.
4. Route the passenger seat belt pretensioner wiring harness through the driver seat bottom frame.
5. Remove the passenger seat belt pretensioner from the passenger seat bottom frame.

INSTALLATION PROCEDURE
1. Install the passenger seat belt pretensioner to the passenger seat bottom frame.
2. Route the passenger seat belt pretensioner wiring harness through the passenger seat bottom frame.
3. Install the nut to the passenger seat belt pretensioner.

Tighten
Tighten the passenger seat belt pretensioner nut to 35 N.m (26 lb ft).

4. Install the passenger seat.
5. Enable the SIR system. Refer to Enabling the SIR System.