Inflator Module Handling, Shipping, and Scrapping

CAUTION: When you are carrying an undeployed inflator module:
^ Do not carry the inflator module by the wires or connector on the inflator module
^ Make sure the bag opening points away from you

When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator module rests. When you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical Provide free space for the air bag to expand in case of an accidental deployment. Otherwise, personal injury may result.

LIVE (UNDEPLOYED) INFLATOR MODULE
Take special care when handling or storing a live (undeployed) inflator module. An air bag deployment produces rapid gas generation. This may cause the inflator module, or an object in front of the inflator module, to jettison through the air in the event of an unlikely deployment

SHIPPING PROCEDURES
Refer to the latest service bulletins for proper SIR inflator module shipping procedures.

SCRAPPING PROCEDURE
During the course of a vehicle's useful life, certain situations may arise which will necessitate the disposal of a live (undeployed) inflator module. The following information covers the proper procedures for the disposing of a live inflator module. Deploy the inflator module before disposal. Do not dispose of the module through normal disposal channels.

CAUTION: Refer to Inflator Module Disposal Caution in Cautions and Notices.

Do not deploy an air bag in the following situations:
^ After replacement of an inflator module under warranty. The module may need to be returned undeployed to the original manufacturer. Refer to the latest service bulletin regarding SIR shipping procedures.
^ If the vehicle is the subject of a Product Liability report related to the SIR system and is subject to a Preliminary Investigation (GM-1241), do not alter the SIR system in any manner. Refer to the latest service bulletin on SIR shipping procedures.
^ If the vehicle is involved in a campaign affecting the inflator modules. Follow the instructions in the Campaign Service Bulletin for proper SIR handling and shipping procedures.