Turn Signal/Warning Lamp Flasher

The hazard warning lamp flasher is part of the turn signal circuit. The hazard warning switch is on the radio/heater control bezel. Depress the hazard warning switch button to cause the front and rear turn signal lamps and the sidemarker lamps to flash. Press the hazard warning switch knob again to turn off the hazard warning flashes.

The hazard warning flashes work with ignition switch in any position. The turn signals do not work when the hazard warning flashers are ON. The hazard warning flasher is in the convenience center behind the I/P driver knee bolster energy absorber directly below the steering column.