Air Outlet Duct Replacement - Floor, LH

REMOVAL PROCEDURE
1. Remove the knee bolster.
2. Remove the RH sound insulator.
3. Remove the LH floor duct screw.
4. Remove the LH floor duct.

INSTALLATION PROCEDURE
1. Install the RH floor duct.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the LH floor duct screw.

Tighten
Tighten the RH floor duct screw until fully seated but not stripped.

3. Install the LH sound insulator.
4. Install the knee bolster.