Engine Oil Dip Stick - Dip Stick Tube: Service and Repair

Removal Procedure





1. Remove the coolant pipe/engine lift bracket bolt (2) from the cylinder head.
2. Grasp the oil level indicator tube (4) firmly.
3. Pull the oil level indicator tube upward to remove.

Installation Procedure





1. Install the oil level indicator tube.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the coolant pipe/engine lift bracket bolt (2) to the cylinder head. Ensure the bolt passes through all of the attached components (1, 3 and 4).
Tighten the coolant pipe/engine lift bracket bolt to 20 Nm (15 ft. lbs.).