Heating and Air Conditioning: Service and Repair
Odor CorrectionIMPORTANT: Do not allow the A/C compressor to operate during this procedure.
1. Start the engine.
2. Set the blower to the highest speed setting.
3. Set the temperature to the maximum heat setting.
4. Remove the A/C system air filters.
5. Turn the engine OFF after 10 minutes.
6. Shake deodorizer spray can.
7. Install the extension tube into nozzle of can.
8. Start the engine.
9. Set the blower to the highest speed setting.
10. Insert the extension tube into the filter opening.
11. Spray short bursts, dispensing contents of can over a 2-3 minute period.
12. Turn the engine OFF.
13. After 3-5 minutes, start the engine.
14. Set the blower to the highest speed setting.
15. Operate the blower at this setting for 15-20 minutes to dry the evaporator.
16. Install the A/C system air filters.