Installation Procedure

1. Install the Inflatable Restraint Front End Discriminating Sensor (3) to the radiator support.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the Inflatable Restraint Front End Discriminating Sensor mounting fasteners (2).

Tighten
Tighten fastener to 11 N.m (98 lb in).





3. Connect the Inflatable Restraint Front End Discriminating Sensor harness connector (4) to the Inflatable Restraint front end discriminating sensor.





4. Install the Connector Position Assurance (CPA) (5) to the Inflatable Restraint Front End Discriminating Sensor harness connector (4).
5. Enable the frontal SIR system.