Inflatable Restraint Instrument Panel Module Replacement

Removal Procedure
Caution: Refer to Inflator Module Handling And Storage Caution in Cautions and Notices.

1. Disable the frontal SIR system.
2. Remove the upper trim panel.
3. Remove the Inflatable Restraint Instrument Panel (IP) module fasteners (2).
4. Remove the Inflatable Restraint IP module (1).

Installation Procedure
1. Install the Inflatable Restraint IP module (1).

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the Inflatable Restraint IP module mounting fasteners.

Tighten
Tighten fasteners to 2 N.m (18 lb in).

3. Install the IP upper trim pad.
4. Enable the frontal SIR system.