Canister Vent Valve: Service and Repair

REMOVAL PROCEDURE
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the EVAP canister vent valve (2) electrical connector.
3. Remove the hose from the EVAP vent valve.
4. Remove the EVAP canister vent valve bolt.
5. Remove the EVAP canister vent valve from the vehicle.

INSTALLATION PROCEDURE
1. Connect the hose to the EVAP vent valve (2).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Reinstall the EVAP canister vent valve bolt.

Tighten
Tighten the bolt to 6 N.m (53 lb in).

3. Connect the EVAP canister vent valve electrical connector.
4. Lower the vehicle.