Driver Information Center Buttons (Digital IPC)

The DIC buttons for the digital IPC are part of the IPC. The buttons are located on the left side of the IPC.

DISPLAY ON/OFF: The DISPLAY ON/OFF button allows the driver to turn a portion of the IPC display off and on. Pressing this button turns off all of the IPC VF displays except for the speedometer, the PRNDL position, and the indicators. Pressing the DISPLAY ON/OFF button a second time turns on all of the displays.
^ Certain buttons on the IPC (such as the INFORMATION, RESET, TIMER, CCC or Fuel Data Center buttons) cause only certain areas of the IPC to be turned on. The displays may or may not automatically turn off after a short time. For example, pressing the TRIP SET button causes the IPC to illuminate all VF displays. If a condition occurs which produces a driver warning message or if the fuel level reaches 4 gallons, all displays turn on and a message is displayed.
^ You may recall the driver information during the display off operation by pressing the INFORMATION button. Pressing the INFORMATION button only causes the driver message center to turn on.

ENG/MET: The ENG/MET button toggles the IPC between English and Metric units.

TRIP SET: The TRIP SET button resets the trip odometer to zero.

INFORMATION: The INFORMATION button scrolls the driver message center through a list of status messages.

TIMER: The TIMER button displays, activates, or deactivates the stopwatch timer.

RESET: The RESET button resets the message parameter display to zero.