TIMER

For the digital and analog IPC on the DeVille with D55, use the following directions in order to operate the timer:
^ Press the TIMER button until the elapsed time message TIMER OFF XX:XX:XX or TIMER ON XX:XX:XX is displayed. The format is hours:minutes:seconds.
^ When one of the elapsed time messages are displayed, press the TIMER button in order to start or stop the timer.
^ Once the elapsed time message is displayed, press the INFORMATION button in order to scroll the driver message center to the next message. The timer continues to increment it the timer was started.
^ In order to reset the elapsed time message (timer) to zero, display an elapsed time message and press the RESET button for at least 1 second. The elapsed time message is displayed as

TIMER OFF 00:00:00 or TIMER ON 00:00:00.

For the analog IPC on the Eldorado, use the following directions in order to operate the timer:
^ Press the INFO button until the elapsed time message TIMER XX:XX:XX is displayed. The format is hours:minutes:seconds.
^ When the elapsed time message is displayed, press the INFO RESET button momentarily in order to start or stop the timer.
^ Once the elapsed time message is displayed, press the INFO button in order to scroll the driver message center to the next message. The timer continues to increment if the timer was started.
^ In order to reset the elapsed time message (timer) to zero, display an elapsed time message and press and hold the INFO RESET button for approximately 1 second. The elapsed time message is displayed as TIMER 00:00:00.