Solar Sensor: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to SIR Handling Caution in Service Precautions.




1. Disable the SIR system.
2. Remove the defroster grille.
3. Disconnect the sunload (2) and the twilight (3) sensors from the defroster grille (1) by turning a quarter turn.




4. Disconnect the twilight sensor from the IP harness.
5. Remove the instrument panel upper trim panel.
6. Disconnect the sunload sensor electrical connector.

INSTALLATION PROCEDURE



1. Connect the sunload sensor electrical connector.
2. Install the instrument panel upper trim panel.
3. Install the twilight sensor to the IP harness.




4. Install the sensors (2,3) to the defroster grille (1) by turning a quarter turn.
5. Install the defroster grille.
6. Enable the SIR system.