Bulb Stays Illuminated and Engine Does Not Start

If the security indicator stays illuminated while attempting to start the engine and the engine does not start, the Instrument Cluster (IPC) has detected an incorrect key pellet resistance (key code) value and activated the system disable functions. Take the following actions:
1. Remove the key from the ignition.
2. Verify that the correct key code (key pellet) is being used in order to start the vehicle. Use a J 35628-A in order to measure each key pellet for the vehicle. Ensure that all of the key codes match.
3. Wait approximately 3 seconds for the system disable timer to expire. Use a known good key with the correct key code in order to attempt to restart the engine.
4. It the engine still does not start, refer to A Diagnostic System Check - Theft Deterrent. Testing and Inspection