Front

Rotor Refinishing Specifications Ammoco(R) Brake Lathe Rough Cut
Spindle Speed 150 rpm
Depth Of Cut (Per Side) 0.15 To 0.64 mm (0.006 inch To 0.025 inch)
Tool Crossfeed (Per Revolution) 0.25 mm (0.010 inch)
Minimum Remaining Thickness:
Including Lining Plate 8 mm (0.315 inch)
Vibrations Dampener Yes
Sand Front Brake Rotor (Swirl Pattern) No
Finish Cut
Spindle Speed 150 rpm
Depth Of Cut 0.10 To 0.15 mm (0.004 inch To 0.006 inch)
Tool Crossfeed (Per Revolution) 0.05 mm (0.002 inch)
Vibration Dampener Yes
Sand Front Brake Rotor (Swirl Pattern) Yes

Accuturn(R) Brake Lathe Single Cut
Spindle Speed 105 rpm
Depth Of Cut As Necessary
Tool Crossfeed (Per Revolution) 0.08 mm (0.003 inch)
Vibration Dampener Yes
Sand Front Brake Rotor (Swirl Pattern) Yes