Rear Compartment Lid Ajar Switch Replacement

REMOVAL PROCEDURE
1. Open the rear compartment lid.
2. Remove the screw at the base of the rear compartment lid.
3. Remove the rear compartment lid ajar switch.
4. Remove the electrical connectors from the ajar switch.

INSTALLATION PROCEDURE
1. Install the electrical connectors to the ajar switch.
2. Install the rear compartment lid ajar switch.

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the screw at the base of the rear compartment lid.

IMPORTANT: Do NOT strip the rear compartment ajar switch screw.

Tighten
Tighten the rear compartment ajar switch screw until fully seated.

4. Close the rear compartment lid.