Oil Baffle Replacement

Removal Procedure

Caution: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Drain the engine oil.
4. Remove the lower oil pan.
5. Remove the upper oil pan.





6. Remove the oil baffle bolts.
7. Remove the oil baffle.


Installation Procedure
1. Install the oil baffle.

Notice: Refer to Fastener Notice in Service Precautions.





2. Install the oil baffle bolts.
^ Tighten the oil baffle bolts to 8 Nm (71 inch lbs.).
3. Install the upper oil pan housing.
4. Install the lower oil pan.
5. Lower the vehicle.
6. Refill the engine oil.
7. Connect the negative battery cable.
8. Reprogram the applicable accessories. Refer to Reprogramming Accessories After Battery Disconnect in Instrument Panel, Gauges, and Warning Indicators.