Dimension & Clearance Specifications - Cylinder Bore

Select Fit Designation Stamped on Block Service Diameter
(8) 85.975-85.985 mm (3.3848-3.3852 in.)
(99) 85.985-85.995 mm (3.3852-3.3856 in.)
(00) 85.995-86.005 mm (3.3856-3.3860 in.)
(01) 86.005-86.015 mm (3.3860-3.3864 in.)
(02) 86.015-86.025 mm (3.3864-3.3868 in.)
(7 + 0.5) OVERSIZE 86.465-86.475 mm (3.4041-3.4045 in.)
Maximum Out-of-Round 0.065 mm (0.0026 in.)
Taper 0.0065 mm (0.0003 in.)