| Ammoco(R) Lathe | Rough Cut | Spindle Speed | 150 RPM |
| | Depth Of Cut (Per Side) | 0.006 Inch To 0.025 Inch (in) |
| | Tool Crossfeed (Per Revolution) | 0.01 Inch (in) |
| | Minimum Remaining Thickness (including lining plate) | 0.315 Inch (in) |
| | Vibrations Dampener | Yes |
| | Sand Front Brake Rotor (Swirl Pattern) | No |
| Finish Cut | Spindle Speed | 150 RPM |
| | Depth Of Cut | 0.004 Inch To 0.006 Inch (in) |
| | Tool Crossfeed (Per Revolution) | 0.002 Inch (in) |
| | Vibration Dampener | Yes |
| | Sand Front Brake Rotor (Swirl Pattern) | Yes |
| Accuturn(R) Lathe | Single Cut | Spindle Speed | 105 RPM |
| | Depth Of Cut | As Necessary |
| | Tool Crossfeed (Per Revolution) | 0.003 Inch (in) |
| | Vibration Dampener | Yes |
| | Sand Front Brake Rotor (Swirl Pattern) | Yes |