Variable Induction Control Valve: Service and Repair

CAUTION: Place a dry chemical (Class B) fire extinguisher near work area before attempting any On-Vehicle Service.

REMOVAL
1. Disconnect the negative battery cable.
2. Remove the intake plenum.
3. Disconnect the vacuum hose at the actuator.
4. Remove the two switchover valve to plenum bolts.
5. Remove the switchover valve from the intake plenum.

INSTALLATION
1. Install the switchover valve to the intake plenum.
2. Install/tighten the two switchover valve to plenum bolts.
3. Reconnect the vacuum hose at the actuator.
4. Install the intake plenum.
5. Reconnect the negative battery cable.