Sun Roof Operation

The sunroof is powered by 12 volts, and features a glass panel with a manually operated sunshade. It is electrically operated from a potentiometer switch, that is located in the overhead console (center). The sunroof is equipped with a pinch guard for safety. Refer to Pinch Guard.

To open the sunroof, turn the ignition switch to the RUN position, then turn the sunroof rotary type switch to the rearward position. The glass panel will retract and slide rearward into the storage space between the roof panel and the headliner. As the glass retracts, the wind deflector extends above the roof line.

To close sunroof, turn the potentiometer switch in the forward position until the glass completely closes, retracting the wind deflector and sealing against the roof opening flange. If the operator turns the rotary type switch past the forward position, after the glass has completely closed. The rear of the glass panel will rise to the vent position. To close the glass, turn the rotary switch to the forward position again and the glass will lower and reseal to the roof opening. The sunroof potentiometer switch allows the sunroof be set to many positions.