Overhead Console
REMOVAL PROCEDUREUpper Console: Removal Procedure:
1. Remove the front floor console compartment tray and lid.
2. Remove the front floor console rear vent housing from console.
3. Remove the bolts from front floor upper console.
4. Remove the screw from front of front floor upper console.
5. Remove the front floor upper console.
INSTALLATION PROCEDURE
Upper Console: Installation Procedure:
1. Install the front floor upper console into mounting position.
2. Install the screw to front of upper console.
Tighten
Tighten the screw until fully seated but not stripped.
3. Install the bolts to front floor upper console.
Tighten
Tighten the bolts until fully seated but not stripped.
4. Install the front floor console rear vent housing to console.
5. Install the front floor console compartment tray.