Pressure Relief Valve Replacement

REMOVAL PROCEDURE

Pressure Relief Valve Replacement: Removal Procedure:

1. Remove the rear fascia.
2. Open the rear compartment lid.
3. Open the rear compartment passenger side panel.
4. Remove the rear quarter relief valve:
^ Push in the clips.
^ Remove the valve through the exterior of the vehicle.

INSTALLATION PROCEDURE

Pressure Relief Valve Replacement: Installation Procedure:

1. Install the rear quarter relief valve:
^ Install the valve with the rubber flaps facing downward in order to prevent water intrusion.
^ Inspect that the tabs are fully seated.
2. Close the rear compartment passenger side panel.
3. Close the rear compartment lid.
4. Install the rear fascia.