Window Stop Bumper

REMOVAL PROCEDURE

Window Stop Bumper Replacement (Front Door): Removal Procedure:

1. Open the front side door.
2. Grasp the door upper sealing strip at the upper outer corner and pull downward to expose the window stop bumper.
3. Remove the window up stop screw.
4. Remove the window up stop.

INSTALLATION PROCEDURE

Window Stop Bumper Replacement (Front Door): Installation Procedure:

1. Install the stop bumper.
2. Install the stop bumper screw.
3. Tighten the stop bumper screw.

Tighten
Tighten the window stop bumper screw to 4 N.m (35 lb in).

4. Push the run channel weather-strip back into place.
5. Close the front side door.