Fastener Tightening Specifications - On-Vehicle

Accumulator Housing:
Cover Bolt 8 - 14 Nm (6 - 10 lb ft)
To Channel Plate Bolt 8 - 14 Nm (6 - 10 lb ft)
Case Cover To:
Bottom Pan To Case Bolt 10 - 12 Nm (8 - 9 lb ft)
Case Bolt 20 - 27 Nm (15 - 20 lb ft)
Case Bolt 27 - 31 Nm (20 - 23 lb ft)
Case Stud 20 - 27 Nm (15 - 20 lb ft)
Case Stud 27 - 31 Nm (20 - 23 lb ft)
Driven Sprocket Support Bolt 20 - 27 Nm (15 - 20 lb ft)
Case Extension To:
Case Bolt 20 - 27 Nm (15 - 20 lb ft)
Case Bolt 50 - 55 Nm (37 - 40 lb ft)
Case Stud 50 - 55 Nm (37 - 40 lb ft)
Case To Forward Clutch Support Stud 25 - 27 Nm (19 - 20 lb ft)
Channel Plate To:
Accumulator Housing Bolt 8 - 14 Nm (6 - 10 lb ft)
Case Bolt 8 - 14 Nm (6 - 10 lb ft)
Case Nut 8 - 14 Nm (6 - 10 lb ft)
LCVB Bolt 8 - 14 Nm (6 - 10 lb ft)
Cooler Connector:
Return (Case) 25 - 29 Nm (19 - 21 lb ft)
To Cooler (Case Cover) 20 - 27 Nm (15 - 20 lb ft)
Detent Lever And Roller Assembly Bolt 8 - 14 Nm (6 - 10 lb ft)
Differential To Final Drive Carrier Bolt 70 - 76 Nm (52 - 56 lb ft)
Drive Sprocket Support To Case Bolt 11 - 13 Nm (8 - 9.5 lb ft)
Input Speed Sensor To Case Bolt 11 - 13 Nm (8 - 9.5 lb ft)
LCVB To Channel Plate Bolt 8 - 14 Nm (6 - 10 lb ft)
Manual Shaft To Detent Lever Nut 27 - 34 Nm (20 - 25 lb ft)
Oil:
Drain - Bottom Pan To Case Cover Plug 8 - 14 Nm (6 - 10 lb ft)
Test Plug - #40 TORX (Case Cover) 18 - 26 Nm (13.5 - 19 lb ft)
Transfer Plate To Case Bolt 8 - 14 Nm (6 - 10 lb ft)
Pressure Control Solenoid Bracket To:
UCVB Bolt 11 - 13 Nm (8 - 9.5 lb ft)
Pump Assembly To Case:
Bolt 11 - 13 Nm (8 - 9.5 lb ft)
Cover Bolt 11 - 13 Nm (8 - 9.5 lb ft)
Scavenge:
Pump Cover To Scavenge Pump Body Bolt 11 - 13 Nm (8 - 9.5 lb ft)
Tube To Case Bolt 8 - 14 Nm (6 - 10 lb ft)
Secondary Pump To Case:
Bolt 11 - 13 Nm (8 - 9.5 lb ft)
Cover Bolt 11 - 13 Nm (8 - 9.5 lb ft)
Servo Cover To Case Bolt 8 - 14 Nm (6 - 10 lb ft)
Side Cover To Case Cover:
Bolt 20 - 27 Nm (15 - 20 lb ft)
Bolt 50 - 55 Nm (37 - 40 lb ft)
Stud 50 - 55 Nm (37 - 40 lb ft)
Spacer Plate Support To Channel Plate Bolt 8 - 14 Nm (6 - 10 lb ft)
Speed Sensor To Case Extension Bolt 8 - 14 Nm (6 - 10 lb ft)
Temperature Sensor 3.4 Nm (30 lb in)
UCVB To:
Case Bolt 11 - 13 Nm (8 - 9.5 lb ft)
Case Cover Bolt 11 - 13 Nm (8 - 9.5 lb ft)
Driven Sprocket Support Bolt 11 - 13 Nm (8 - 9.5 lb ft)