Idle Speed/Throttle Actuator - Electronic: Service and Repair

Throttle Body Exploded View:

Removal Procedure

Notice: Numbers in text correspond to numbered components in image.

1. Remove the Idle Air Control (IAC) valve electrical connector.

2. Remove the two IAC valve attaching screws (4).

3. Remove the IAC valve (1).

Installation Procedure
1. Install the new IAC O-ring.

2. Install the IAC valve and tighten the screws. Tighten screws to 3 Nm (27 lb in).

3. Connect the IAC valve electrical connection