Power Steering Pump Replacement

Pump Assembly

Remove or Disconnect

1. Negative battery cable.
2. Serpentine belt. Drive Belt

Power Steering Pump Mounting:

3. Pump pulley.
4. Pressure line at pump.
5. Pump retaining bolt.
6. Adapter from pump.

Install or Connect
1. Pump mounting bolts.
Tighten pump mounting bolts to 24 Nm (18 ft-lb.).
2. Adapter to pump.
3. Pressure line at pump.
4. Pump pulley.
5. Serpentine belt.
6. Bleed air from system and inspect for leaks.