Auxiliary Engine Oil Cooler (ETC and STS Only)

Before VIN Breakpoints: STS 816430
ETC 609432

Remove or Disconnect

1. Raise vehicle.

2. Splash shield.

3. Right splash shield. Six push pins.

4. A/C compressor splash shield. Four bolts.





5. Inlet and outlet lines from auxiliary engine oil cooler. Two quick connectors. Refer to Figure 1.

6. Inlet oil cooler line from vehicle.

7. Oil cooler line from engine.





8. Outlet cooler line from vehicle. Refer to Figure 2.

Install or Connect





1. New adapter fitting to radiator outlet. Refer to Figure 3.

2. New oil cooler line fitting to radiator outlet. Refer to Figure 3.

3. New oil cooler outlet line into the oil filter adapter inlet. Refer to Figure 3.

4. A/C compressor splash shield. Four bolts.

5. Right splash shield. Six push pins.

6. Splash shield. Three bolts.

7. Lower vehicle.