Instrument Panel Center Trim Panel Replacement

Instrument Panel Center Trim Panel Replacement

Removal Procedure

1. Remove the transmission control lever knob assembly. Refer to Transmission Control Lever Knob Replacement Transmission Control Lever Knob Replacement.




2. Remove the instrument panel center trim panel screws (1).




3. Unclip the instrument panel center trim panel on both sides.




4. Unclip the instrument panel center trim panel in the shown direction.




5. Unclip the instrument panel center trim panel at both upper clip points in the shown direction (arrows).

Installation Procedure





Note: The clips will make an audible click when fully engaged.

1. Clip in the upper two clips (arrows).




2. Install the instrument panel center trim panel.

3. Clip in the instrument panel center trim panel.

Caution: Refer to Fastener Caution Fastener Caution.

4. Install the instrument panel center trim panel screws (1).

5. Install the transmission control lever knob assembly. Refer to Transmission Control Lever Knob Replacement Transmission Control Lever Knob Replacement.