Crankshaft Rear Oil Seal Replacement (Automatic Transmission)

Crankshaft Rear Oil Seal Replacement (Automatic Transmission)

Special Tools

EN-42067 - Rear Main Seal Installer

For equivalent regional tools, refer to Special Tools (LDK, LHU) Tools and Equipment.

Removal Procedure

1. Remove the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement Automatic Transmission Flex Plate Replacement.




2. Remove the crankshaft rear oil seal (1) with a suitable tool.

Installation Procedure




1. Install the crankshaft rear oil seal (1) using the EN-42067 - installer (2).

2. Install the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Replacement Automatic Transmission Flex Plate Replacement.