Cylinder Head Assembly: Specifications

CYLINDER HEAD TORQUE & SEQUENCE





Install NEW cylinder head fasteners

Cylinder Head Bolt
First Pass 30 Nm (22 lb ft)
Final Pass 155 degrees

Cylinder Head Front Bolts (4) 35 Nm (26 lb ft)

SURFACE VARIATION

Cylinder Head
Surface Flatness - Block Deck
Longitude 0.050 mm (0.002 in)
Overall 0.1 mm (0.004 in)
Transverse 0.030 mm (0.0012 in)

CAMSHAFT BEARING CAP

Camshaft Cap Bolt 10 Nm (89 lb in)

Camshaft Gear/Sprocket Bolt Specifications

Intake Manifold Specifications

Exhaust Manifold Specifications