Symptoms - Object Detection

Symptoms - Object Detection

Note: The following steps must be completed before using the symptom tables:

1. Perform the Diagnostic System Check - Vehicle Diagnostic System Check - Vehicle before using the Symptom Tables in order to verify that all of the following are true: before using the Symptom Tables in order to verify that all of the following are true:

* There are no DTCs set.

* The control modules can communicate via the serial data link.

2. Review the system operation in order to familiarize yourself with the system functions. Refer to Object Detection Description and Operation (with rearview camera UVC) Object Detection Description and Operation (with rearview camera UVC)Object Detection Description and Operation (with side blind spot alert UFT) Object Detection Description and Operation (with side blind spot alert UFT)Object Detection Description and Operation (with parking assist UD7) Object Detection Description and Operation (with parking assist UD7).

Visual/Physical Inspection

* Inspect for aftermarket devices which may affect the operation of the system. Refer to Checking Aftermarket Accessories Checking Aftermarket Accessories.

* Inspect the easily accessible or visible system components for obvious damage or conditions which may cause the symptom.

* Make sure the parking assist sensors located on the vehicle front and rear bumper are clear. Remove any snow, mud or ice that is blocking the sensors.

Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections Testing for Intermittent Conditions and Poor Connections.

Symptom List

Side Blind Spot Alert System Malfunction Side Blind Spot Alert System Malfunction

Parking Assist System Malfunction Parking Assist System Malfunction

Rear Vision Camera System Malfunction Rear Vision Camera System Malfunction